Note: you are suggested to install the following before the drivers:
-.netframework
CHIPSET:
Download here
ftp://ftp.hp.com/pub/softpaq/sp30001-30500/sp30265.exe
restart after installation
First Install MS-UAA:
ftp://ftp.hp.com/pub/softpaq/sp32501-33000/sp32646.exe
restart and then install:
Audio Driver:
ftp://ftp.hp.com/pub/softpaq/sp41501-42000/sp41610.exe
(if you still have problems after installing sound look at the additional note for sound installation)
MODEM:
ftp://ftp.hp.com/pub/softpaq/sp35001-35500/sp35335.exe
WIRELESS AND NETWORK:
Broadcom wireless driver:
ftp://ftp.hp.com/pub/softpaq/sp33001-33500/sp33008.exe
ETHERNET:
Realtek RTL8102E Family PCI-E Fast Ethernet NIC
Download
or
Download
GRAPHIC DRIVER:
If you have Nvidia Graphic
v176.37
(there are 2 links below and similar version, just choose one)
Download
or
Download (recomended)
If you have Intel Graphic:
Intel graphic accelerator 4500MHD
Download
-----------------------------------
Intel matrix storage manager:
Download
Intel sata Driver:
Download
Werbcam:
Download
Touchpad – Synaptics Touchpad.exe
Quick launch – Quick launch buttons.exe
Card Reader – driver for card-reader
Bluetooth – Download
HDMI Audio – HDMI-R203.exe
========================
============================
Adiitional notes: Audio installation:
============================
If in case you fail to install the sound driver above remeber to make sure you already install SP2 patch and .netframework, also make sure install MS-UAA(with reboot) before Audio driver. If the sound still not working, follow this method:
1. download CQ40-317TU audio driver OR SP39671_IDT High Definition Audio CODEC (recomended) (ftpsp39671)
2. Unzip the file to a folder then install Hotfix – kb888111 first ” \SP39671\HDAQFE\xpsp2\us\kb888111xpsp2.exe “
3. Now install the audio driver ” \SP39671\ setup.exe “
4. Do not reboot. Now you should be able to hear the audio. If not goto ” Device manager>System Devices>Microsoft UAA Bus Driver… > Right Click – Disable ” then Enable it again and follow steps 2 and 3.
5. After you hear the audio output proceed to next step, don’t reboot.
.
6. download “devcon” utility from microsoft. (78KB)
7. Unzip ‘devcon.exe’ and copy the ‘ I386\DevCon.exe ‘ file to ‘ C:\Windows\system32 ‘
8. Start > RUN > cmd
9. In the prompt type (without quotes) ” devcon find pci* “
10. Scroll up and look for a line before ” Microsoft UAA Bus driver for High Defenision Audio” some thing like this “PCI\VEN_10DE&DEV_055C&SUBSYS_30EA103C&REV_A1\3&2411E6FE&0&38: Microsoft UAA Bus
Driver for High Definition Audio”
.
11. Now copy the under lined part from your command prompt by “right clicking on the Title bar>Edit>Mark” and mark the line u need to copy (till the under lined part only) hit “Enter” to copy.
12. In the desktop create a text file called ‘ audio.txt ‘and paste it replacing the underlined characters as shown below with qoutes.
DEVCON.EXE RESTART “PCI\VEN_8086&DEV_293E&SUBSYS_3607103C&REV_03“
14. Save the file and rename it to ” audio.bat ” now copy it to ” C:\Documents and Settings\User\Start Menu\Programs\Startup “
-.netframework
CHIPSET:
Download here
ftp://ftp.hp.com/pub/softpaq/sp30001-30500/sp30265.exe
restart after installation
First Install MS-UAA:
ftp://ftp.hp.com/pub/softpaq/sp32501-33000/sp32646.exe
restart and then install:
Audio Driver:
ftp://ftp.hp.com/pub/softpaq/sp41501-42000/sp41610.exe
(if you still have problems after installing sound look at the additional note for sound installation)
MODEM:
ftp://ftp.hp.com/pub/softpaq/sp35001-35500/sp35335.exe
WIRELESS AND NETWORK:
Broadcom wireless driver:
ftp://ftp.hp.com/pub/softpaq/sp33001-33500/sp33008.exe
ETHERNET:
Realtek RTL8102E Family PCI-E Fast Ethernet NIC
Download
or
Download
GRAPHIC DRIVER:
If you have Nvidia Graphic
v176.37
(there are 2 links below and similar version, just choose one)
Download
or
Download (recomended)
If you have Intel Graphic:
Intel graphic accelerator 4500MHD
Download
-----------------------------------
Intel matrix storage manager:
Download
Intel sata Driver:
Download
Werbcam:
Download
Touchpad – Synaptics Touchpad.exe
Quick launch – Quick launch buttons.exe
Card Reader – driver for card-reader
Bluetooth – Download
HDMI Audio – HDMI-R203.exe
========================
============================
Adiitional notes: Audio installation:
============================
If in case you fail to install the sound driver above remeber to make sure you already install SP2 patch and .netframework, also make sure install MS-UAA(with reboot) before Audio driver. If the sound still not working, follow this method:
1. download CQ40-317TU audio driver OR SP39671_IDT High Definition Audio CODEC (recomended) (ftpsp39671)
2. Unzip the file to a folder then install Hotfix – kb888111 first ” \SP39671\HDAQFE\xpsp2\us\kb888111xpsp2.exe “
3. Now install the audio driver ” \SP39671\ setup.exe “
4. Do not reboot. Now you should be able to hear the audio. If not goto ” Device manager>System Devices>Microsoft UAA Bus Driver… > Right Click – Disable ” then Enable it again and follow steps 2 and 3.
5. After you hear the audio output proceed to next step, don’t reboot.
.
6. download “devcon” utility from microsoft. (78KB)
7. Unzip ‘devcon.exe’ and copy the ‘ I386\DevCon.exe ‘ file to ‘ C:\Windows\system32 ‘
8. Start > RUN > cmd
9. In the prompt type (without quotes) ” devcon find pci* “
10. Scroll up and look for a line before ” Microsoft UAA Bus driver for High Defenision Audio” some thing like this “PCI\VEN_10DE&DEV_055C&SUBSYS_30EA103C&REV_A1\3&2411E6FE&0&38: Microsoft UAA Bus
Driver for High Definition Audio”
.
11. Now copy the under lined part from your command prompt by “right clicking on the Title bar>Edit>Mark” and mark the line u need to copy (till the under lined part only) hit “Enter” to copy.
12. In the desktop create a text file called ‘ audio.txt ‘and paste it replacing the underlined characters as shown below with qoutes.
DEVCON.EXE RESTART “PCI\VEN_8086&DEV_293E&SUBSYS_3607103C&REV_03“
14. Save the file and rename it to ” audio.bat ” now copy it to ” C:\Documents and Settings\User\Start Menu\Programs\Startup “
